fizler
17th November 2001, 12:10
/nerd mode on :D :D :D
A buddy of mine and I have decided to “nerd out” over our Christmas and thanksgiving break. We are both getting Athlon XP 1800+ New MOBO + RAM and Video cards. A few case mods are going to be done. For me I’m adding a Red Neon light, red acrylic window, atomic etching, and final a fan bus controller to work all this stuff!. The neon was purchased from ebay. I have a father who is an electrical engineer but doesn’t have time to help me build anything so I had to blow 20 bucks on the fan bus, which I would have rather made myself.
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1295796423
Fanbus : http://www.pcmods.com/details.asp?ProdID=3
Atomic Etched window : http://www.pcmods.com/details.asp?ProdID=133
Red Window : http://www.pcmods.com/details.asp?ProdID=153
I've borrowed a dermal and a rotor zip from my moms boyfriend. Can’t wait to hack my case apart. I’ll post pictures of the finished products! Should be sometime over thanksgiving! Peace Fizler :D :D
I'm also adding a larger intake in the front, 80mm I think and the same for the back. Might do a fan on the top or sides but I don't know if i'll need it.
A buddy of mine and I have decided to “nerd out” over our Christmas and thanksgiving break. We are both getting Athlon XP 1800+ New MOBO + RAM and Video cards. A few case mods are going to be done. For me I’m adding a Red Neon light, red acrylic window, atomic etching, and final a fan bus controller to work all this stuff!. The neon was purchased from ebay. I have a father who is an electrical engineer but doesn’t have time to help me build anything so I had to blow 20 bucks on the fan bus, which I would have rather made myself.
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1295796423
Fanbus : http://www.pcmods.com/details.asp?ProdID=3
Atomic Etched window : http://www.pcmods.com/details.asp?ProdID=133
Red Window : http://www.pcmods.com/details.asp?ProdID=153
I've borrowed a dermal and a rotor zip from my moms boyfriend. Can’t wait to hack my case apart. I’ll post pictures of the finished products! Should be sometime over thanksgiving! Peace Fizler :D :D
I'm also adding a larger intake in the front, 80mm I think and the same for the back. Might do a fan on the top or sides but I don't know if i'll need it.