Total power page

[Medic193]

Made up a quick page for everyones total power. I'll tweak it a little over the next few days. Just wanted to get the info inputed. If you don't see your name on the list e-mail me or post it here. I also need memory and comp info. If you think something else should be inputed or have some ideas for the page, LMK

Send me your info (medic@mmcable.com)


Total power info (http://home.mmcable.com/babybeard/totalpower.htm)

Thanks, Medic

[fizler]

hey medic thats pretty damn tight, do you think you could sort them by the highest to lowest in mhz..? btw i am at 2100mhz . with a total of 896 megs of ram.. thanks
fizler

[Medic193]

I was thinking about that, but thought that the people with the lowest power would be at the bottom, and they would think that they are less important. Which they are not. I chose alphabetical to aviod this situation. This is just a rough draft and it will change many times before I'm complete.

[geekboy]

That's one nifty table, Medic. I think it would also be useful to know the number of machines each member is running.

btw, my one (measly) computer has 512MB of RAM.

[siggy]

Guess Sniper, Virus and I will have to get together and figure out what we all have.

[pelligrini]

Originally posted by geekboy
That's one nifty table, Medic. I think it would also be useful to know the number of machines each member is running.

btw, my one (measly) computer has 512MB of RAM.

Yea, the number of cpu's would be cool too. There are quite a few of us that run SMP.

BTW looks good!

[Stilgar]

Just got an amd 333 to toss in the stats. Total processors 4. total ram 512 + I have one wild card. I don't have direct control on. (My-son-in-laws 1 gig with 256 ram) He may or may not be running it much. Last couple weeks I may have seen 1 or 2 extra wu's turned in. Need to have a serious talk to him.;)

[wbierman]

Let's see.....

CPUs = 8

Total GHz = 9.5GHz

Total memory = 3,072MBs

OSs =

Win2K Pro = 2

Win2K Advanced Server = 3

Win XP RC1 = 2

Win ME = 1

[Chas]

More info Medic on my machines

number of m/cs= 3

total ram = 730

Running win millenium on one and win 98 on two

[SkzDaLimit]

Deryck, just mailed my info off to you!

[verT]

Medic, I don't want to be picky but I'm gonna be:D When you get the chance can you change the "t" in my nick to a "T":)

Thanks

[MikeTimbers]

3.88GHz
2756MB RAM

(massively helpded by twin 1GHZ with 2¼GB ECC RAM)

[Medic193]

Originally posted by verT
Medic, I don't want to be picky but I'm gonna be:D When you get the chance can you change the "t" in my nick to a "T":)

Thanks

K will do VerT :D

I'm doing another redesign. Just haven't been happy with how it looks. Mike I got your info.

[papeniglio]

OK Med
here's an update to my total power:

total MHz: 4283 MHz
total RAM: 3008 MB
total CPUs: 7

Great job! Go further, you'r on the right way :) !

GeeK!

[Hans Arne Iversen]

Total mhz 2150
Total ram 576
Total cpu 3

[viperdog]

just an update to your figures....been tweeking..


Totals

4222 Mhz

560 meg Ram

6 CPU's

Yea I know I need more ram..and the price is right too.. That will be my next "purchasing round".

[Dustin]

Hi Deryck,

Could you please update my numbers.

7.2Ghz
7 CPU's
1536M RAM

Thanks!

[Medic193]

Update is done. Now that I have a laptop I'll be able to spend a LARGE amount of time re-working the total power and personal info page. I have plenty of sit around time on the graveyard shift. :D

[Pecado]

Here is my speed junk:

T-Bird 1200
1,5 gb ram (pc133)
OS: Me (looking forward to XP)


I have tryed to OC it but at 1333, the (I suspect) cooling paste on my Fan started to smell bad, really burned. But the MB senser only showed 64 degrees celcius!?!............I am still shaking from the I qoute "Is it me or is something burning?".......then one of my friends said "yes"......:eek:

I am new here but I am already having a blast reading the posts on the board........:D

Now I will sneak around the board some more, see ya :D

[Virus]

You need to cool that puppy down. It may have too much paste.

[Medic193]

Originally posted by Pecado
Here is my speed junk:

T-Bird 1200
1,5 gb ram (pc133)
OS: Me (looking forward to XP)


I have tryed to OC it but at 1333, the (I suspect) cooling paste on my Fan started to smell bad, really burned. But the MB senser only showed 64 degrees celcius!?!............I am still shaking from the I qoute "Is it me or is something burning?".......then one of my friends said "yes"......:eek:

I am new here but I am already having a blast reading the posts on the board........:D

Now I will sneak around the board some more, see ya :D

What are you using to cool that? T-birds run hot normally, but when u try to OC them they really need some high power cooling. 64 C is REALLY hot. Even though AMD says they can run hotter than that and not hurt the CPU, I think they are crazy. The cooler the better. If you want some tips on cooling post a message in the cooling forum, I'm sure you'll have about 20 people give you their opinion.:D I'll get you on the power page within a couple days. Wow you have more RAM then you have speed. Ha Wow!!!!! That be mucho memory!! I'm jealous. How many spots do you have for ram and what size are the chips? OOC

[Pecado]

Originally posted by Medic193


What are you using to cool that? T-birds run hot normally, but when u try to OC them they really need some high power cooling. 64 C is REALLY hot. Even though AMD says they can run hotter than that and not hurt the CPU, I think they are crazy. The cooler the better. If you want some tips on cooling post a message in the cooling forum, I'm sure you'll have about 20 people give you their opinion.:D I'll get you on the power page within a couple days. Wow you have more RAM then you have speed. Ha Wow!!!!! That be mucho memory!! I'm jealous. How many spots do you have for ram and what size are the chips? OOC

Hi Medic193,

I use some cheap fan for the cooling, and I know that 64 C is really hot but as you said yourself AMD says it can be much hotter.....And I had just read the AMD spec's so I thought I would try to OC it.....
And now to your question: I have 3 ram slots so the size of the chips is Obvious:D It is a abit KT7A raid MB.....
And I will follow your advise and make a post in the cooling forum, seems I need some major help on this OC thingy:rolleyes:

[fury]

If you smell burning, you probably should shut off your computer

I would definitely get better cooling on that mofo before you try to overclock it again.

T-birds become unstable after about the 50-55 degree range. I've experienced it myself. I have a Glacier 2 on my T-bird 1.2 and it gets up to 55 when it is overclocked to 1400, and is not stable (when I am using the system, it will occasionally lock up. It works fine when I leave it genoming unattended though, go figure :rolleyes: )

[Medic193]

Well when you get the thing cooled down some more you should be able to OC easily with an Abit board. Myself on the other hand have had nothing but bad luck with Abit. I've owned two Abit boards and refuse to buy another one. Funny thing is when I build a system for someone else and use an Abit board they work perfectly. Guess it's just my house.:D Good luck getting it cooled down. I use 2 delta fans and an SK6 HS. It's loud as hell but cools quite nicely.:D

[fury]

That's funny, I've had bad luck with my KT7a as well... my KT7 is fine, but not the KT7a...

It doesn't go any FSB higher than 133. At all. PERIOD. Where others see FSBs up to 150-155, I am lucky even 133 works.

I know my hard drive, modem, and Geforce2 are fine with busses up to 37 PCI and 74 AGP, because I had my bus at 112 once. So my board is defective or something.

the fan on my Glacier 2 is pretty loud too, they (OCZ) claim it's quieter than a Delta but still pushes about as much air (36CFM)

It's hard to cool it when the house doesn't often get cooler than about 30 degrees

[viperdog]

OK probably showing my stupidity...


Fury.. when I first setup my IWill KK266r it to only showed FSB to 133..I thought "well this is a jip", then realized I needed to set the 100/133 FSB jumper...dah! Well once that was set to 133 the bios then let me play all the way up to 165 (?) and 133 became the lowest setting I could pick.....

So does your board have a jumper that needs to be set to 133 range?

Soryy if I'm totally off base..

[zhotfire]

Originally posted by fury
That's funny, I've had bad luck with my KT7a as well... my KT7 is fine, but not the KT7a...

It doesn't go any FSB higher than 133. At all. PERIOD. Where others see FSBs up to 150-155, I am lucky even 133 works.

Fury, what bios are you running on the KT7a? The raid ver i have needed alot of bios tweaking but is running rock stable under full load now... my KT7e is fine now too.... these boards are NOT for the faint of heart! :eek:

[Pecado]

Originally posted by fury
If you smell burning, you probably should shut off your computer

I would definitely get better cooling on that mofo before you try to overclock it again.

T-birds become unstable after about the 50-55 degree range. I've experienced it myself. I have a Glacier 2 on my T-bird 1.2 and it gets up to 55 when it is overclocked to 1400, and is not stable (when I am using the system, it will occasionally lock up. It works fine when I leave it genoming unattended though, go figure :rolleyes: )

hehe, my T-bird 1200@1333 has run stable at 64c celcius.....Yes you read right 64c! Beside the burning smell it was stable:confused:
And yes I turned it of as soon as I could confirm where the smell came from :)

As I wrote I belive it was the "chewing gum" on the cooler that couldent take the "presure".......I think that my MB (Abit KT7A-Raid) cant show higher temps then 64c.....Because it was 64c when I clocked it to 1300, and was still 64c at 1333:confused:
Can anyone confirm this?

And now the unclocked temp is 61c :( Again leading my suspicion to the "chewing gum" being fried....
So my speed junk is just sitting there doing nothing.....I dont dare to run it at those temps for to long......So I only have a P200mmx crunching Genome at the moment:( while I wait for my new cooler.....But I have gotten alittle cooled feet about the cooler I have ordered......It may not be very good, check my post at the overclocked and cooled forum.....And give me you opinion...Remember that I am a cpu cooler newbie:D

[Medic193]

OK Alchemist and myself have been putting in a lot of time with the total combined power of our team and all of our personal info. I need everyone to follow the supplied links in this message and my sig to see if what we have for you is correct. I have a lot of everyones personal info and that will be added soon once we build all of your personal pages. I've added an average machine to the page but it's kind of skewed because I''m missing data on a lot of people.

We need this info from people that have not responded

Total MHZ, RAM and CPU's(speed and type), Name, Home location, ICQ number, E-mail address if you want, links to your system pics if you have them uploaded, occupation, website address if you have one.

We need everyones help in getting this complete. So if you haven't sent us your info, get off your lazy butts and send me an E-mail. :D :p :D

This is a rough draft. The server is slow, but it will be corrected once we get them all complete.

Medic personal info page (http://www.icon.co.za/~mschafer/genome/Medic.html)

[Jodie]

Originally posted by Medic193
Total MHZ, RAM and CPU's(speed and type), Name, Home location, ICQ number, E-mail address if you want, links to your system pics if you have them uploaded, occupation, website address if you have one.

Medic personal info page[/URL]

I know you'll hate me 'cause I'm always adding junk and in a couple cases, needed to take a machine or two down for other projects...

Here's the latest along with expected-soon:

Total Mhz: 18.973Ghz RAM: 9216

CPUs: 22

See http://www.interactdevices.com/tgc/index.html

Planned for very soon: Another 850EB, another 900 AMD, another two 1.333 AMD. And whatever other odd hardware I find.

I plan to add an additional two 1.333 every two weeks, as well. (That's an additional 70Ghz/year assuming that processor speed improvements stop now. ;) )

Look out, Pel, I'm gunning for YOU! :D :p :cool:

Jodie Reynolds, Folsom, CA, ICQ is never on, jlr@interactdevices.com, www.interactdevices.com/tgc/index.html, Chief Technology Officer, none

[Medic193]

Trust me we won't hate that you keep adding and changing machines. Feel free to do what ever you like. We'll update the page whenever it needs it.:D

[Jodie]

Originally posted by Medic193
Trust me we won't hate that you keep adding and changing machines. Feel free to do what ever you like. We'll update the page whenever it needs it.:D

Woah, trippy! New collective logo?!!?

Thanks for 'putting up with the changes' [grin]

I hardly seem to get the AMDs running for 5hrs before g@h (linux version) dies with a bad work unit. I'm switching only the AMDs back to .98, see if that helps. For the record, .99 under Linux is ROCK solid on the Intel's. (I guess I make a good QA bed... [grin] I feel like Noah, two of everything...):D :D :D :cool:

[phil]

Originally posted by Jodie

I hardly seem to get the AMDs running for 5hrs before g@h (linux version) dies with a bad work unit. I'm switching only the AMDs back to .98, see if that helps. For the record, .99 under Linux is ROCK solid on the Intel's. (I guess I make a good QA bed... [grin] I feel like Noah, two of everything...):D :D :D :cool:


Same findings here Jodie....running RH7.1, I have had 4 crashes with the 0.99 client on the T-Bird. I have now went back to 0.98 as it was much more stable.

[Jodie]

nod. I'm going to go ahead and switch the AMDs to .98. I've had four deaths at 70% on sequence 29. That HURTS!

Thanks for confirming your findings too!

[Hans Arne Iversen]

Medic
My name is wrong
Iversen, not Iverson

[MechCD]

Dude, yer avatar is intersting, whats it a pic of?

[Hans Arne Iversen]

It's Dani from Cradle of filth.
(my favourite band)

[Jodie]

Hey, I just noticed... this is my one-week anniversary of being assimilated!:cool:

[Hans Arne Iversen]

:o Happy birthday to you, happy birthday to you :o
http://www.duhspot.com/users/smiley/s/contrib/owen/council.gif

[randycw]

Medic and Alchemist, GREAT JOB!!!! :D The personal info and Total Power pages are excellent. Only one problem: seeing where I rank on the total GHz scorecard is starting to provoke me! :D I think I might have to scrape something together, and/or really push to overclocking a bit. (Had the 1GHz clocked to 1587MHz = 138FSB x 11.5 during the winter when I could pull super cold outside air into the case. Awww winter will be here soon!)

[Jodie]

Originally posted by Hans Arne Iversen
:o Happy birthday to you, happy birthday to you :o


WOW!!! THANK YOU!:o

[Medic193]

Originally posted by randycw
Medic and Alchemist, GREAT JOB!!!! :D The personal info and Total Power pages are excellent. Only one problem: seeing where I rank on the total GHz scorecard is starting to provoke me! :D I think I might have to scrape something together, and/or really push to overclocking a bit. (Had the 1GHz clocked to 1587MHz = 138FSB x 11.5 during the winter when I could pull super cold outside air into the case. Awww winter will be here soon!)

thanks

Hans- Sorry about that, I'll get it corrected.

Wait until you all see the update that I'm working on for the page. It's pretty cool. Hope it doesn't bog down the dial up users too badly. :D

[siggy]

Originally posted by Jodie
Hey, I just noticed... this is my one-week anniversary of being assimilated!:cool:

Happy anniversary, Jodie. I hope there will be many, many, many more.

[Bruce]

Originally posted by Jodie
nod. I'm going to go ahead and switch the AMDs to .98. I've had four deaths at 70% on sequence 29. That HURTS!


Be sure and save them. Sooner or later there'll be a linux client that lets you complete the last two sequences. Or e-mail them to somebody with Win9x 0.99 which does complete "corrupt" work units.

[Bruce]

Originally posted by Hans Arne Iversen
Medic
My name is wrong
Iversen, not Iverson

He thought you were from Sweden, not Norway.

[siggy]

I have the same problem with my last name. ppl put SON instead of SEN.

[Jodie]

Originally posted by siggy


Happy anniversary, Jodie. I hope there will be many, many, many more.

Thanks! I'm sure there will be! Having fun with it! Much better than seti!

[Jodie]

Originally posted by Bruce


Be sure and save them. Sooner or later there'll be a linux client that lets you complete the last two sequences. Or e-mail them to somebody with Win9x 0.99 which does complete "corrupt" work units.

I moved them over to intel/linux boxes to finish them. They seem happier, so I'm sending the stack trace diffs on both to Stephan. I can actually see (and even fix the assembler, if I were inclined) the bug...

[Dustin]

Originally posted by Medic193



You sure are making it hard for me to catch you.:D Let me know when you get it totaled and I'll make the changes. That goes for everyone. It only takes a minute to change, so it's really not a problem.

Should have posted in this thread in the first place.;)

I can't give you full stats on those boxes.

They are 4 PIII 700's, and I assume they have 128M RAM (can't really have less running W2K). They aren't running 24/7, and I don't have a clue as to the uptime.:(

So that's 10G, 2048M RAM, 11CPU's

All you skeptics (tankers), I should be getting a part time P4 1.7G online soon too.:D

[Dustin]

Originally posted by Jodie
Hey, I just noticed... this is my one-week anniversary of being assimilated!:cool:

Sorry, just noticed this post! Assimilation is very :cool: isn't it?:D

[Jodie]

Originally posted by Dustin


Sorry, just noticed this post! Assimilation is very :cool: isn't it?:D

I'm enjoying it!

[MechCD]

blasted tank.. you should call it the Unimatrix Zero sphere, not a tank

[Bruce]

Originally posted by MechCD
blasted tank.. you should call it the Unimatrix Zero sphere, not a tank

No kidding. How do you draw a sphere in ascii?

BTW, in the next day or two, the sphere/tank will pass me in total WU. :( I don't know if that is good or bad.:confused: I guess it really doesn't matter since it's all going where it should. :)

[Medic193]

I just noticed jodie picked lara croft as her avatar. Very interesting! Did anyone go see this movie. Just curious if it was any good. I know Angelina Jolie (sp?) is kind of on the weird side. I heard she carries her husbands blood around in her necklace. Now that is just plain weird.:eek:

[Jodie]

It's kind an interesting story... The video game char has always been my hero since the day she came on the scene. Never really told anyone.

The movie came out and five seperate people said "Oh my god! It's JODIE CROFT!" after having seen it... I saw it, loved every instant of it, and was tremendously flattered, because she exactly lived up to the video game character expectations (atleast that I had)

Sooo, it's kinda stuck - and an ideal avatar for me.

Probably more than anyone wanted to know... (and I prefer Sig 9mm, the .50 Desert Eagle is to big for me, and I'm pretty tall. Same height as Angelina Jolie, interestingly enough...):cool:

[Jodie]

I think carrying her husband's blood in a necklace is kinda sweet, if that's true...

WOW! Finally! I broke into the 500+/24hr Finally left green and entered the land of the yellow! :D :cool: :D :cool: I'm happy!

[Dave S]

Jodie i like your new avatar tooo :rolleyes::D:D & well done on the 500+ aday, i can see why your happy:D

PS UROCK GIRL:D:D:D

[Jodie]

WOW! THANK YOU!:D

[Dustin]

Hey Medic,

Where you have the averages at the top, Could you put the average number of CPU's per person instead of just "1"?

[Dave S]

U R welcome :), keep em coming & U will be #1 before U know it:D

[Jodie]

Darn, it was a tenuous hold on 500+... Yesterday's crashes pushed me out for the rest of today... Oh well, time to add more hardware... I'll go buy a couple more 1.3's tonight... :D

As if I needed an excuse... :rolleyes:

[Dave S]

Hey no sweat, with 2 more 1.3s:eek: you'll soon be at 500+ hell 600+:D

LOL:p ...... Jodie go-4-it:D :D

[Medic193]

Originally posted by Dustin
Hey Medic,

Where you have the averages at the top, Could you put the average number of CPU's per person instead of just "1"?

I put the 1 there to represent that each computer had the following power and memory. If I put the avg number of computers it wouldn't make any sense. I could put that somewhere else. Let me think it over.

[Dustin]

Originally posted by Jodie
Darn, it was a tenuous hold on 500+... Yesterday's crashes pushed me out for the rest of today... Oh well, time to add more hardware... I'll go buy a couple more 1.3's tonight... :D

As if I needed an excuse... :rolleyes:

Hey Jodie,

Perhaps your crashing is an OS/MB/Client problem. Meaning the three don't work well together.

My Tbird/A7V133's crash less than my PIII/CUSL2 does.
Seeing you buy so much hardware all the time, why not try a different board?

[Jodie]

Thanks, Dustin, but it's a Linux with AMD with .99 issue, and fairly well-known at this point. The Intel/Linux/.99 is rock solid. The AMD/Linux/.99 is decidedly less so...:( Hopefully it's getting resolved.... I've sent stack traces, samples, proc snapshots, etc to Stephan. In fact, I could actually patch my binaries and solve the problem, it's fairly obvious...

[Jodie]

I'm on my way down to pick up two more 1.33 machines, along with the Dual AMD that I got sampled, should be here mid next week. If I can actually get into and stay in the yellows, then the amber/gold is the next target... :D ;)

[Dustin]

Originally posted by Jodie
I'm on my way down to pick up two more 1.33 machines, along with the Dual AMD that I got sampled, should be here mid next week. If I can actually get into and stay in the yellows, then the amber/gold is the next target... :D ;)

I think you should go straight for the red.:D

[Jodie]

Sounds expensive :p

[Medic193]

Originally posted by Jodie
Sounds expensive :p

You're thinking about this the wrong way. You need to concentrate on the red issue. :D :D

[Jodie]

Muuust doooooo reeeeeed

Muuust doooooo reeeeeed

On that note... Two more 1.333 coming online now!

:cool:

[Rick_Deadly]

Way to go Jodie!

You da woman! :)

[Jodie]

[curtsey]:cool:

[Jodie]

latest damage report for power is here:

http://www.thegenomecollective.com/forum/showthread.php?s=&postid=9456#post9456

All those machines are up and alive and such.

I have an SNMP MIB extension to monitor them and page me if anything goes down...

I really need a life...

[Jodie]

Oh, and since this IS the 'Total power page'. . ..

At max-draw, I have 140amps (8Ax18 machines) of power supply, or 7200 watts of DC power. Or - 20 amps shy of everything I have available in my inside computer room. As soon as the rennovation is done on the garage computer room (larger AC going in), I'll move it out there with several hundred amps and rackmount everything... I *really* need a life.:rolleyes: :rolleyes: :rolleyes:

[Dave S]

Jodie, when I said go-4-it I didn’t think you would literary :rolleyes:hehehe, but hey just glad were on the same team, :D the way we/your going we will blow by them pirates before they know wot hit em.:eek:

I await your arrival in the top part of the chart and will just watch in ore as you fly by.......:cool:

You have the POWER therefore you are the QUEEN of the Collective, us drones await your next command........:D :D :D

[Daniel, Laura, and Nora]

As one of the little people I get a vicarious charge out of your quest for power. You go, girl. When you start consistently hitting red we'll add another category. What color would you like?:D

I've been wondering.... Wouldn't it be more efficient to invest in a used mainframe and figure out a way to run the client on it? Or is my ignorance showing?

Daniel

[dnar]

The funny thing is....... Jodie is awaiting the release of a client to run on her Vaxxen. No joke, heh Jodie....:D

Suggestion: Everone head over Here (http://groups.yahoo.com/group/genomeathome/polls) and vote for Dec Alpha and Solaris clients.... I have, many days ago ! :D

[Dave S]

Originally posted by dnar
The funny thing is....... Jodie is awaiting the release of a client to run on her Vaxxen. No joke, heh Jodie....:D

Suggestion: Everone head over Here (http://groups.yahoo.com/group/genomeathome/polls) and vote for Dec Alpha and Solaris clients.... I have, many days ago ! :D
cool:cool:
done:D
&
done:D

[Jodie]

Originally posted by Dave S
Jodie, when I said go-4-it I didn’t think you would literary :rolleyes:hehehe, but hey just glad were on the same team, :D the way we/your going we will blow by them pirates before they know wot hit em.:eek:

I await your arrival in the top part of the chart and will just watch in ore as you fly by.......:cool:

You have the POWER therefore you are the QUEEN of the Collective, us drones await your next command........:D :D :D

{Massive Blush!}

And thank you - if we get Solaris and Alpha clients both, I'll be in the red every day easily... [grin]

[Jodie]

Originally posted by Daniel, Laura, and Nora
As one of the little people I get a vicarious charge out of your quest for power. You go, girl. When you start consistently hitting red we'll add another category. What color would you like?:D

I've been wondering.... Wouldn't it be more efficient to invest in a used mainframe and figure out a way to run the client on it? Or is my ignorance showing?

Daniel

Purple, definitely purple... Or we could go Silver for 7500 and Purple for 10k... :D

I have two super computers - 20 Processor Sparc Ultra-Enterprise machines, two mainframes (Vax 11/784) that are hardly worth talking about, and a bunch of super-workstations (Alpha) that I could bring online at will, 24/7. Someone add COSIX to the list for me, would you? I've the chance to pick up a Cray YMP at auction. Think it will go pretty cheap...:D :D :cool:

Thanks for all the attention all! But it's undue - my daily output so far hasn't equaled Pelligrini... HE'S King.

[dnar]

Right.... If the Cray gets a client, I'm out! You Win!
Whats the point crunching on an abacus if you have Cray!
*** GAME OVER ***

[Jodie]

The Cray's aren't all THAT fast... Massive bandwidth to memory and devices that has never been duplicated, but for raw processing power - they're old-tech. The two 20 processor sparcs are probably about as fast. Throw in the Vaxxen and Alphas and certainly we're talking about the same kind of speed... They're not the pinnacle they once were...

[Jodie]

Now the Cray T3E, on the other hand, THERE'S a machine to drool over. I don't see them come up very often, and you pay a premium for them. They're 512 processor, 106.8 gigaflops. THAT's what I'd like to have...

I've run on Cray networks before where the YMP was a terminal to the T3D. (The YMP is an 8 processor vector super computer. 2.5 gigaflops, peak.)

A bunch of Compaq EV6's is what I'm waiting to find...

Looking at comparison charts -

Five DEC Alpha 8400/6-575 will outrun a Cray YMP-J90 in pure computational power (I have four)

But it would take 21 of them to outrun a Fujitsu VPP-300 (which I've never used)

Two HP PA-9000/V2200 will outrun the YMP-J90...

etc.

[Dave S]

Jodie said
{Massive Blush!}

And thank you - if we get Solaris and Alpha clients both, I'll be in the red every day easily... [grin]

Now THAT i gotta C:D :cool: :D :cool:

[dnar]

Originally posted by Jodie

The Cray's aren't all THAT fast... Massive bandwidth to memory and devices that has never been duplicated, but for raw processing power - they're old-tech. The two 20 processor sparcs are probably about as fast. Throw in the Vaxxen and Alphas and certainly we're talking about the same kind of speed... They're not the pinnacle they once were...

Now, if I remeber rightly, liquid nitrogen cooled are the crays.... I wonder what a Tbird will do when cooled sub-zero..... Back latter!:D

[Jodie]

Naw, the old 2 series were nitrogen cooled. The YMP and T3D/T3E are deskside super computers. And tremendously faster...

[Mardagg]

You guys wanna use any thing from the [H] SuperComputer Stats as far as ideas go, your more then welcome.

Gnome on brothers,

http://members.home.net/rbudd76/Hordes.htm

[Dustin]

Originally posted by Dustin
[B]
I can't give you full stats on those boxes.

They are 4 PIII 700's, and I assume they have 128M RAM (can't really have less running W2K). They aren't running 24/7, and I don't have a clue as to the uptime.:(

So that's 10G, 2048M RAM, 11CPU'sB]

Hi Medic,

You still haven't updated my stats. Although I can't give you deffinate figures, you can tell from my week/day totals that I have alot more power then 7.2Mhz, and I didn't even figure in the P41.7.

[Medic193]

Originally posted by Dustin


Hi Medic,

You still haven't updated my stats. Although I can't give you deffinate figures, you can tell from my week/day totals that I have alot more power then 7.2Mhz, and I didn't even figure in the P41.7.

ooops:eek: I'll get it updated.

[Dustin]

Originally posted by Medic193


ooops:eek: I'll get it updated.

Thanks Medic, it's very difficult to get thing's totaled for you. It's like pulling teeth to get any information on those computers (I hope you're reading this Deb). For future reference, any part time computers, I'll figure in at 50% uptime.

[Dave S]

Originally posted by Mardagg
You guys wanna use any thing from the [H] SuperComputer Stats as far as ideas go, your more then welcome.

Gnome on brothers,

http://members.home.net/rbudd76/Hordes.htm
:cool: thanx:)